MICRO TORQUE METER
MTS 100 Series
It has been generally said that manufacturing of the micro torque sensor which uses strain gauge was difficult, especially when it is sought to be small and durable, accurate and precise, yet at the reasonable cost.However, we developed smaller and highly efficient torque sensor based on our years of experience.This product has already been used by many satisfying customers.
[ Use Application ]
- Compact Size Bearing
- Compact Size Motor Torque
- Electrical Machinery and Electrical parts
- Other Micro and Ultra Micro Torque Measurements
*Please read the PDF for Outside dimension and specification (main body).
[ Specification ]
- Initial Balancing Point / within}5% rated output
- Insulation Resistance /@200M-omega- above
- Allowable Overload / Double the rated torque
- Operating Temperature limit / Room Temperature -50ºc
- Cable / 2m Included (Edge NDI standard 7 connector cable)
- Excellent response and rated torsion angle is approx.1
Outside Dimensions
[ Specification ]
Model |
SH-2 |
SH-5 |
SH-10 |
SH-30 |
H-50 |
H-100 |
H-300 |
H-500 |
H-1000 |
H-2000 |
H-5000 |
Type |
Non- Revolving Type |
Rated Torque (mMm) |
0.2 |
0.5 |
1 |
3 |
5 |
10 |
30 |
50 |
100 |
200 |
500 |
Bridge Resistance value (Ά) |
120 |
120 |
120 |
120 |
350 |
350 |
3580 |
350 |
350 |
350 |
350 |
Rated Output (mV/V) |
0.75 |
1 |
2 |
2 |
0.5 |
0.5 |
0.75 |
0.75 |
1 |
1 |
1 |
Degradation Ability (%/Rated Value) |
}0.1 |
}0.1 |
}0.05 |
}0.05 |
}0.1 |
}0.1 |
}0.1 |
}0.1 |
}0.1 |
}0.1 |
}0.1 |
Linearity (%/Rated Value) |
}1 |
}1 |
}1 |
}1 |
}0.5 |
}0.5 |
}0.5 |
}0.5 |
}0.5 |
}0.5 |
}0.5 |
Allowed Revolution |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
(within rpm) |
Applied Voltage (V) (Regular/Maximun) |
3 |
3 |
3 |
3 |
10,15 |
10,15 |
10,15 |
10,15 |
10,15 |
10,15 |
10,15 |
Shaft ³a (mm) |
³4 |
³4 |
³4 |
³4 |
³4 |
³4 |
³4 |
³4 |
³6 |
³6 |
³6 |
Flat Dimension |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
5.5 |
5.5 |
5.5 |
S (mm) |
|
Model |
SR-30 |
R-50 |
R-100 |
R-300 |
R-500 |
R-1000 |
|
Type |
Revolving Type(w/ Slip Ring Transfix Axis) |
Rated Torque (mMm) |
3 |
5 |
10 |
30 |
50 |
100 |
|
Bridge Resistance value (Ά) |
120 |
350 |
350 |
350 |
350 |
350 |
|
Rated Output (mV/V) |
2 |
0.5 |
0.5 |
0.75 |
0.75 |
1 |
|
Degradation Ability (%/Rated Value) |
}0.05 |
}0.1 |
}0.1 |
}0.1 |
}0.1 |
}0.1 |
|
Linearity (%/Rated Value) |
}1 |
}0.5 |
}0.5 |
}0.5 |
}0.5 |
}0.5 |
|
Allowed Revolution |
500 |
1000 |
1500 |
1500 |
1500 |
1500 |
|
(within rpm) |
Applied Voltage (V) (Regular/Maximun) |
3 |
10,15 |
10,15 |
10,15 |
10,15 |
10,15 |
|
Shaft ³a (mm) |
³4 |
³4 |
³4 |
³4 |
³4 |
³6 |
|
Flat Dimension |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
5.5 |
|
S (mm) |
|